glass panel ORNAMENT SR200 TSG BASIC GREEN structured 535x1420x4mm L/R

Glazing cut-out
ORNAMENT SR200
Art. No. 534062017

Glass door ORNAMENT SR200

Structured

In addition to smooth and satin glass surfaces, structural glass is also available in the GRIFFWERK range. These glasses are given their special appearance in raw glass production by rolling. Due to the striking surface structure, they provide extraordinarily good visual protection with very high light gain. BAROCK, CHINCHILLA, MASTER-CARREÉ, SILVIT and ORNAMENT SR 200 are the favourites among this type of glass and enjoy great popularity.

Visualization of the decor shows the GRIFFWERK glass door ORNAMENT SR200_533 ornament in the version revolving door - DIN right - studio / office - tempered safety glass BASIC GREEN

Alternative products

ORNAMENT SR200 533 structured glass

Light openings

Light openings are glass inserts for wooden doors and thus a real option for a style-conscious modernisation of the living space. The living spaces receive more daylight overall and radiate a brighter atmosphere. Glass type and decors for light openings from Griffwerk can be selected individually. Many variation possibilities result from the extensive product range.

The picture shows the glass panel GRIFFWERK ALLSATIN 501 in the version matt with Grünglas BASIC GREEN

The picture shows the glass panel GRIFFWERK DECO 583 in the version clear glass with white glass PURE WHITE

Basic Green

Green glass, as the name suggests, has a green tint. Basic Green by Griffwerk is the simplest and most unpretentious form of glass. The brighter and more light-filled the living room design, the more noticeable the green discolouration. The green discolouration of the glass can be seen as a disadvantage and should therefore already be taken into account in the colour concept when designing the interior. For more flexibility in interior design and an authentic lighting effect, Griffwerk therefore recommends higher-quality PURE WHITE white glass, where daylight can have a natural effect.

Simple float glass has a clear green tinge, which changes the light effect and also can be performed by a clear discolouration in the glass surface.

How do I clean a light cut-out?

When cleaning your interior glass, it is sufficient to clean the surface of the glass with warm water. To do this, please use a sponge or a soft, lint-free cloth. Clean over a large area and not selectively.

In the case of residues such as fingerprints on the glass door, you can also use commercially available glass cleaners (foam cleaners). Please do not use any abrasive, corrosive, acidic or alkaline cleaning agents. They attack the glass surface and can cause scratches. Excess water can be wiped dry with a microfibre cloth. If water is left on the glass for a long period of time, stubborn limescale residues can form. Therefore, please use only as much water as necessary right from the start. Excessive use of water or cleaning agents can cause the wooden strips to swell.

With laminated glass, make sure that the edge seal does not come into contact with water, otherwise moisture and the cleaning agent can penetrate the laminate.

Attention

Please do not use any scratching tools, razor blades or scrapers. They can leave visible and irreparable scratch marks on the surface.

We generally recommend our special GRIFFWERK cleaning sponge for every cleaning of your glass door.

How do I clean my Glass door?

When cleaning your interior glass, it is sufficient to clean it with warm water. Use a sponge or a soft, lint-free cloth for this purpose. Clean over a large area, not selectively.

If there are residues, such as fingerprints, you can also use commercially available glass cleaners (foam cleaners). Please refrain from using corrosive, acidic or alkaline cleaning agents, as these can cause scratches. Excess water can simply be wiped dry with a microfiber cloth. If water acts on the Glass door over a longer period of time, stubborn lime residues can form.

In the case of Laminated glass doors, make sure that the edge seal does not come into contact with water, otherwise moisture and the cleaning agent can penetrate the laminate.

For satinized and lasered surfaces
To avoid abrasion, you should not apply too much pressure here. To prevent so-called cloud formation, rub your glass door dry over a large area with a microfiber cloth. Do not use paper or cellulose cloths. They cause too much abrasion.

For screen-printed glass
Screen-printed models are softer than pure glass and therefore more sensitive to mechanical cleaning agents. In addition, they must not come into contact with acids, as these can attack the printed image.

Attention
Please do not use any scratching tools, razor blades or scrapers. They can leave visible and irreparable scratch marks.

Glazing cut-out ORNAMENT SR200

Art. No. 534062017

Bookmark article Find store